Fixing a Flat ATV Tire: A Complete Guide

Here’s the thing: if you’re driving an ATV on your farm, you can take it back to your garage when you end up with a punctured tire. However, if you’re stuck with a flat ATV tire in the middle of nowhere, then the real problem starts.

Because the last thing you want is being stuck miles away from home with no other option but to drag a 400-pound machine back to your garage.

A lot of things can lead to flat ATV tires; like nails, screws or debris on the road. Tires can also rupture because of a sharp rock or a slice from a sharp stick. Whatever be the cause, it is crucial to find a way to quickly and effectively repair a hole in your ATV tire.

This guide deals with the problem of fixing your ATV’s tire.

Have a look.

Repairing The Flat ATV Tire

Firstly, the most useful tip is to always carry a tire repair kit in your quad. This kit consists of all the tools you need to fix various ATV mechanical issues.

Now, the best way to fix a flat ATV tire is by plugging it. The main advantage of this method is that you don’t have to remove the tire from the ATV. Here’s how to pull off plugging the right way:

  1. Locate the puncture and use a cloth to clean the spot.
  2. Check if it has any rocks or debris stuck inside. If so, they need to be removed first.
  3. Once everything is clean, scuff the area surrounding the puncture.
  4. After that, put cement around the hole on the tire.
  5. Put the plug in the hole and fill it properly.
  6. Use CO2 cartridges to inflate the tire to an adequate pressure.
  7. Check if there are more leaks by scanning the tire.
  8. Once done, you’re set to ride again!

Pay Attention To The Tire Air Pressure

A tire that’s flat or has low air pressure can end up creating a lot of issues for the vehicle. The tire can make noise, causing your ATV to vibrate, and making it difficult to control. To prevent this from happening, you should check the tire pressure regularly. The tires have a recommended amount of air pressure, which is mentioned on the sidewall. As you ride the ATV, you should check the tires and make sure they are always inflated to the recommended air pressure.

Preventing an ATV Flat Tire

Proper knowledge is imperative to avoid a flat ATV tire.

Start by assessing the terrain you’ll be riding on. For example, if you frequently ride on sandy or gravelly terrain, it is advisable to have a tire pressure of around 5-6psi.

If you ride on rocky terrain with an over-inflated tire, you’re inviting trouble.

Looking out for sharp objects in the way is the next thing to do. Small rocks with sharp edges or tree logs are the biggest enemies of your quad’s tires. Make sure you avoid these as much as possible while riding.

You can also use tire sealants to avoid punctures. While these may be good for avoiding small holes that de-inflate tires, these don’t work well with bigger punctures.

Final Word

ATVs are frequently exposed to punctures due to rough terrains. That makes it important for you as a rider to know the nitty-gritty of handling your quad’s puncture.

Use the tips mentioned in this article to successfully sort out an ATV tire puncture situation. If you need more information regarding ATV tires or ATVs in general, get in touch with a local dealership.

The post Fixing a Flat ATV Tire: A Complete Guide appeared first on Auto Freak.

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *